Hello all,
i am going to attempt to hold this brief. Very long time thread reader, first time poster.
My pal and I bought a retrofit package every for the Entrance PDC sensors, it included all the things we wanted. For sure we each already had PDC Sensor on the again. We put in it on his automobile (F30) and coded it utilizing E-Sys with none issues.
I then proceeded to instal it in my 2015 F20 (LCI). The instal when nicely. Adopted all of the instruction, no drawback there.
Coding is one other story. As per the directions, I learn my FA, saved, edited it and deleted 507 and added 508 to the FA. Within the coding part, I needed to code 3 ECU’s. Ill simply point out that I’m utilizing E-Sys 3.30.1 with PSdZData Lite v4.39.30. The directions I’ve inform me the primary ECU is the HU_NBT[63] however mine would not have this, as an alternative it has a HU_ENTRYNAV [63] which I imagine (in a way) is the primarily similar factor.
So to recap, i had 3 ECU’s to code: The HU_ENTRYNAV [63], ICM [1c] and REM [72].
The primary 2 ([63] & [1c]) coded with none issues. Once I tried to code the REM[72] it gave me this error:
“REM [72] cd Deploy FinishedWithError cafd_000007a1-005_044_016 NotExecutable”
It did nevertheless change the graphics on the automobile’s display screen, once I would put it into reverse or press the brand new PDC button (positioned close to the gear lever) it could present the radar on the entrance of the automobile too (initially it was solely the rear) however it could not flip inexperienced/orange/crimson when i might drive near something.
I contacted ShawnSheridan from the Discussion board (shout out to Shawn who was greater than affected person and answered a bunch of questions) and together with his steering we have been in a position to determine that every one 3 ECU’s have been in a position to be coded efficiently utilizing the unique 507 however the REM failed each time when making an attempt to make use of 508. Therefore he decided (as I’ve completely minimal to no data about coding) that (and I quote) “508 shouldn’t be appropriate along with your REM. Why I do not know. Could have to determine the underlying FDL Codes related to 508 after which attempt to FDL Code the sensors’
Once I requested methods to “determine the underlying FDL Codes related to 508 after which attempt to FDL Code the sensors” he rightly prompt utilizing BimmerUtility which I do not need.
All I’ve the E-Sys & PSdZData variations talked about above and BimmerCode (with a bluetooth adapter that connects to the automobile). Even when I have been to buy BimmerUtility (which I kinda need to keep away from) I would not have the faintest concept on methods to “determine the underlying FDL Codes related to 508 after which attempt to FDL Code the sensors”.
Has anybody had this problem earlier than and resolved it? Or does anyone know methods to resolve it? Or does anybody know methods to “determine the underlying FDL Codes related to 508 after which attempt to FDL Code the sensors” as Shawn prompt? And even already figured them out?
Thanks