When you have a catalytic converter that was stolen or is damaged, this catalytic converter package featured within the video under is a simple alternative half that matches instantly and gained’t require welding. This implies you are able to do a DIY catalytic converter restore, lower your expenses, and probably have a greater set up than with knowledgeable.
DIY Catalytic Converter Package & Restore for Broken or Stolen Catalytic Converters
What Occurs When a Catalytic Converter Is Stolen?
Normally, the catalytic converter is stolen with a reciprocating noticed. This could injury elements just like the oxygen (O2) sensor and go away you with a broken exhaust pipe that could possibly be welded. We suggest changing the entire O2 sensors similtaneously the stolen or damaged catalytic converter.
Typical Steps for a DIY Catalytic Converter Restore
With a catalytic converter package just like the one proven within the video above at 3:05, the hangers included make it straightforward to exchange a stolen or broken catalytic converters your self with out having to weld or clamp the brand new converter to any outdated, minimize, or broken exhaust pipes.
Basic steps to put in a catalytic converter package
Take away Any Protecting Shields
Take away any protecting shields beneath the pipes or switch case. Normally there might be a protect held in by a couple of fasteners.
Take away the Crossmember If Wanted
Chances are you’ll must take away the crossmember beneath the switch case after which help (not carry) the switch case with a carry jack or a ground jack with a stable piece of 4×4 or 6×6 wooden.
Dismount and Decrease the Exhaust Pipe
Dismount the exhaust by dismounting or eradicating any elements like hangers, mounts, and bolts to decrease and take away the exhaust pipe.
Set up and Mount the New Exhaust Pipe Earlier than Tightening
Earlier than tightening any bolts or mounts to the brand new exhaust pipe, first set up and mount it into place. Make certain the exhaust pipe is away from contacting any elements like crossmembers or warmth shields earlier than tightening all of the parts, just like the bolts or clamps.
Tighten the entire fasteners slowly by hand, entrance to rear, and make sure the exhaust pipe is pulled up in place and never contacting different elements. This can forestall any rattling or vibration from the exhaust whereas driving.
Set up New Oxygen (O2) Sensors
As soon as the brand new catalytic converter package has been put in, set up model new O2 sensors. Set up the sensors after the exhaust package has been put in to forestall injury.
Alter the Exhaust If Wanted
As soon as the entire elements are put in, re-check the exhaust to verify it’s not contacting different parts like the warmth protect. Alter the exhaust if wanted.
For instance, as talked about by our skilled mechanic Sue, the metallic hanger brackets can bend, which isn’t a giant difficulty however could should be adjusted with a pry bar.
Extra Automotive Restore & Automotive Suggestions for All DIYers & Mechanics
Store High quality Auto Elements – Free Transport – Direct Match
Abstract
Article Identify
DIY Catalytic Converter Restore: Repair Broken or Stolen Elements – 1A Auto
Description
Comply with these DIY catalytic converter restore suggestions on this article and video and discover ways to repair this elements your self with the following tips from our skilled mechanics
Writer
1A Auto Staff
Writer Identify
1A Auto
Writer Brand
